Algorithm|a series of logic statements used in a computer or microprocessor Controller|a digital _____________ installed by a manufacturer on a specific product at the factory. Baud|the rate at which information is transmitted across communication lines. Bit|short for binary digit BMS|a centralized, computer-controlled system for managing various systems. Bus|a multi-wire communication cable that links all the components in a hard-wired computer network. Control point|the name for each input and output device wired to a digital controller. Collection|the ___________ of trend, runtime, and consumable data from the digital controllers in a building. Digital|a device that uses an input module, a microprocessor, and an output module to perform control functions. Direct|the use of a digital controller is referred to as a _______ digital control Ethernet|a family of frame-based computer networking technologies for local area networks. Firmware|computer programs that are permanently stored on the comptuer’s memory during a manufacturing process. Gateway|a link between two computer programs allowing them to share information by translating between protocols. http|the base protocol used by the worldwide web. IP|a data-oriented protocol used for communication data across a packet-switched internetwork. Address|a unique ______________ that certain electronic devices use in order to identify and communication with each other on a computer network. Interoperability|the ability of digital controllers with different protocols to function together accurately. Load-shedding|systematically switching loads out of a system to reduce energy consumption. LAN|a server/client computer network connecting multiple computers within a building or building complex. Interface|a local ___________ device is a keypad with an alphanumeric data display and keys for data entry Network|a means of linking devices in a computer-controlled PIC|a digital controller installed by a manufacturer on a product at the factory. Protocol|a convention that governs the format and timing of communication between devices in a computer network. Tenant|_______ billing is the ability to charge for after-hours use of the building’s HVAC system. WAN|a server/client computer network spread over a large geographical area.