Module 1 Overview
This module contains information the assignments you will be completing in this course. Please note that all drawings needed to complete assignments are located in the "Drawings" module.
Module Contents
- Discuss Syllabus & Outline
- Read the chapter on Multiview Projection/Orthographic Projection in any text book
- View PowerPoint on Orthographic Projection
- Discuss 1st angle vs 3rd angle projection
- Discuss the miter line
- Assignment – Drawing CAD 102-1ns
Module 1 – Introduction, Orthographic Projection
Objectives:
- Discuss the Syllabus and Outline
- Power Point Presentation on Orthographic Projection
- Discuss 1st angle vs 3rd angle projection
- Discuss the miter line
Notes:
- Use geometry in 3rd angle projection
- Defined layers
- Defined line weights
- Defined line style
- How the Miter line solves the missing view
- 45 degree line transitions projections
- Why not deleting/erasing construction lines
- Modelspace =full scale
- Paperspace = need scale
- How to project tangencies and foreshortened planes
Assignments:
- Read textbook chapter on multiview/orthographic projection
- Print out Drawing CAD 102-1
- Using your new understanding of Orthographic projection solve CAD 102 A (in the syllabus).
- Select an appropriate "template" (ANSI/ISO)
- Assign your own dimensions to the part
- Then in model space using proper layers, construction, and miter line
- Solve for the FRONT, TOP, and Right Side of the part.
- Do not erase/delete construction lines or the miter line
- Go to Paper-Space and locate the three views of the part
- Viewport. Set an appropriate scale. Apply dimensions.