Title: Module Overview-4
Course: Open PRO120 Equipment 1 > Section: MODULE 4: Process Drawings & Turbines

Module Overview: Process Drawings & Turbines | Module Learning Objectives
Face-2 Face Class

TBA

Online

In order to achieve those learning objectives to the right, you will have to take action! For this module, you should:

1. First read, watch or listen to the videos.
2. Flip through my PPTs, download the PDF versions to take notes and write questions for the classroom.
3. Next Read the Chapter for this mod-follow the directions in the Chapter Reading overview.
4. Participate in the discussion forum as outlined within the forum
5. Complete the other assignments
6. Take the Reading Review Quiz
By the end of this module, you will be able to:

- Recall the purpose of turbines in the process industry.
- Identify the common types/applications of turbines.
- Recall the components of a turbine.
- Explain the purpose of each component.
- Describe the operating principles of turbines.
- Describe safety and environmental hazards associated with turbines.
- Identify typical procedures associated with turbines.
- Describe the process technician’s role in turbine operation and maintenance.
- Identify typical problems associated with turbines.

- Explain the purpose of diagrams including why/when/where they are used.
- Identify the major unit sections in flow sequence.
- Recall symbols used for major process equipment.
- Identify components on a typical PFD.
- Identify components on a typical P&ID.
- Identify the major unit sections in flow sequence.
- Recall symbols used for major process equipment.
- Identify components on a typical PFD.
- Identify components on a typical P&ID.