Title: About This Course
Course: Capstone Exercise 1 (IC 110-IC 110) > Section: Web Content

Capstone Project

Write the ladder logic diagram program and wire the capstone project kit to make the car wash project preforms the following sequence of operations (Be Sure To Use Proper Rung Numbering and Numerical Cross-Referencing):
Pressing start will start the operation
Car stops at the second sensor (Wash) and LED's (Wash) turn on for 10 Seconds
Car will then continue to the third sensor (Soap) where it will stop and the LED's (Soap) will turn on for 15 seconds
The car will then return to the Wash area, where the first sensor will stop the car and turn on the LED's (Wash)
After the 10 seconds the car will then move to the Rinse station where the sensor will stop the car and turn on the LED's (Rinse) for 5 seconds
The car will then move to the Wax station where the sensor will stop the car and turn on the LED's (Wax) for 8 seconds
The car will then move to the Dry station and the sensor will again stop the car and the fans will turn on for 20 seconds
The stop button will stop the sequence whenever pushed
Points Breakdown:
Complete Ladder Diagram (includes Rung
Numbering and Numerical Cross-Referencing)         15
Wash station proper operation                                15
Soap station proper operation                                 15
Returning to Wash station                                      20
Rinse station proper operation                                15
Wax station proper operation                                 10
Dry station proper operation                                  10